| | |
|
| |
| | |
|
|
MegaSquirt PnP3 ECU Miata MX5
|
MS3
|
Price: $1,199.00 (+$29.00)
Detailed Description

Built to order. Allow 2-4 weeks lead time for assembly.
Standalone engine management computer Miata, MX5, Eunos, Roadster 89-93 94-95 99-00 01-05 04-05 Mazdaspeed MX5
MS3 Pro Control VVT engine!
Fully Plug and Play Installation - No wiring required for basic functionality. Average install time is under 1 hour. Base maps is pre-loaded to help your engine start on the first turn of the key. Real time tuning and data logging with a laptop connection. Supports most aftermarket wideband sensors. This is the same ECU 949 Racing uses on it's fleet of record setting and national championship winning Miatas.
Instructions: 01-05 Instructions 04-05 Mazdaspeed Instructions
Easy to Use and Install!
- Fully Plug and Play Installation - No wiring required for basic functionality. Average install time is under 1 hour for most models!
- Base maps is pre-loaded to help your engine start on the first turn of the key
- Real time tuning and data logging with a laptop connection
- Supports most aftermarket wideband sensors
Fully Tunable Engine Control!
- 16x16 Fuel Tables
- 12x12 Ignition Tables
- 8x8 VVT tables
- Programmable voltage regulator control
- Multiple Acceleration enrichment strategies
- Closed Loop Idle Speed Control
- Air Conditioner Control
- 4 sequential fuel injector channels with available individual trim tables
- Onboard peak and hold drivers support both high and low impedance injectors - No external ballast resistor is needed!
- Allows removal of stock airflow meter
Advanced Feature Set (Included!)
- 12x12 Air Fuel Ratio Target Tables for use with wide band O2 sensor for precise tuning and table trim
- Mutiple traction control strategies
- Built-in support for a wide array of ignition triggers
- Built-in 3-step rev limiter with flat shift
- Launch Control
- Real time barometric correction
- Internal 4-bar MAP sensor reads up to 44PSI of boost
- Overboost protection
- Closed loop boost control
- Knock sensor input with adjustable sensitivity
- Headphone output for knock sensor - listen for knock while you tune!
- Table switching input. Change fuel and spark maps on the fly for different fuels, maximum power, maximum economy, nitrous activation, etc.
- Input for flex fuel sensor
- CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors.....the possibilities are limitless!
Megasquirt Screenshots
Megasquirt Info and Downloads
|

Visit our YouTube channel

|
|